行业标准规范英汉对照-加工工艺（一）

62 GB/T 8491-1987 高硅耐蚀铸铁件 Corrosion resistant high silicon iron castings
63 GB/T 8492-1987 耐热钢铸件 Heat resistant steel castings
64 GB/T 8493-1987 一般工程用铸造碳钢金相 metallograph of cast carbon steels for general engineering purposes
65 GB/T 8539-1987 齿轮材料及热处理质量检验的一般规定 General specification for quality inspection of gear materials and their heat treatment
66 GB/T 8619-1988 钎缝强度试验方法 Method of the strength test for brazed and soldered seam
67 GB/T 9437-1988 耐热铸铁件 Heat resistant iron castings
68 GB/T 9438-1988 铝合金铸件技术条件 Aluminium alloy castings--Technical specification
69 GB/T 9439-1988 灰铸铁件 Grey iron castings
70 GB/T 9440-1988 可锻铸铁件 Malleable iron castings
71 GB/T 9441-1988 球墨铸铁金相检验 metallographic test for spheroidal graphite cast iron
72 GB/T 9446-1988 焊接用插销冷裂纹试验方法 Welding--Cold cracking test method using implants
73 GB/T 9447-1988 焊接接头疲劳裂纹扩展速率试验方法 Test method for fatigue crack growth rates of welded joints
74 GB 9448-1988 焊接与切割安全 Safety in welding and cutting
75 GB/T 9450-1988 钢件渗碳淬火有效硬化层深度的测定和校核 Determination and verification of the effective depth of carburizod and hardened cases of steel parts
76 GB/T 9451-1988 钢件薄表面总硬化层深度或有效硬化层深度的测定 Determination of total or effective thickness of thin surface hardened layers of steel parts
77 GB/T 9452-1988 热处理炉有效加热区测定方法 Testing method for working zone of heat treating furnace
78 GB/T 9460-1988 铜及铜合金焊丝 Welding wire and rods of copper and copper alloys
79 GB/T 10044-1988 铸铁焊条及焊丝 Covered electrodes and welding rods for welding cast iron
80 GB/T 10045-1988 碳钢药芯焊丝 Carbon steel flux cored wires for arc welding
81 GB/T 10046-1988 银基钎料 Silver brazing filler metals
82 GB/T 10858-1989 铝及铝合金焊丝 Aluminium and aluminium alloy welding rods and wires
83 GB/T 10859-1989 镍基钎料 Nickel base brazing filler metals
84 GB/T 11350-1989 铸件机械加工余量 Machining allowances on castings
85 GB/T 11351-1989 铸件重量公差 Mass tolerances for castings
86 GB/T 11352-1989 一般工程用铸造碳钢件 Carbon steel castings for general engineering purposes
87 GB/T 11354-1989 钢铁零件 渗氮层深度测定和金相组织检验 Steel-iron parts—Determination of nitrided case depth and metallographic examination of nitriding structure
88 GB/T 11363-1989 钎焊接头强度试验方法 Methods of the strength tests for brazed and soldered joint
89 GB/T 11364-1989 钎料铺展性及填缝性试验方法 Test method of spreadability and clearance filling ability for filler metal
90 GB/T 12214-1990 熔模铸造用硅砂、粉 Silica sand and flour for investment casting