行业标准规范英汉对照-工艺装备(1)

1 GB/T 967-1994 螺母丝锥 Nut taps

2 GB/T 968-1994 丝锥螺纹公差 Manufacturing tolerances on the threaded portion of taps

3 GB/T 969-1994 丝锥技术条件 Technical specification for taps

4 GB/T 970.1-1994 圆板牙 型式和尺寸 The types and dimensions for circular screwing dies

5 GB/T 970.2-1994 圆板牙 技术条件 Technical specifications for circular screwing dies

6 GB/T 970.3-1994 圆板牙架型式和互换尺寸 Die stocks--Interchangeability dimensions

7 GB/T 971-1994 滚丝轮 Thread rolling cylindrical dies

8 GB/T 972 -1994 搓丝板 Thread rolling flat dies

9 GB/T 1008-1989 机械加工工艺装备基本术语 General terminology of machining tooling

10 GB/T 1109-1985 短莫氏锥柄立铣刀 End mills with short Morse taper shank

11 GB/T 1115-1985 圆柱形铣刀 Cylindrical cutters

12 GB/T 1117-1985 直齿三面刃铣刀 Side and face milling cutter with straight teeth

13 GB/T 1118-1985 错齿三面刃铣刀 Side and face milling cutters with double alternate helix

14 GB/T 1119-1985 尖齿槽铣刀 Flat relieved tooth slotting cutters

15 GB/T 1124.1-1996 凸凹半圆铣刀 第1部分: 凹半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 1: The types and dimensions for concave milling cutters

16 GB/T 1124.2-1996 凸凹半圆铣刀 第2部分: 凸半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 2: The types and dimensions for convex milling cutters

17 GB/T 1124.3-1996 凸凹半圆铣刀 技术条件 Convex and concave milling cutters technical specifications

18 GB/T 1131-1984 手用铰刀 Hand reamers

19 GB/T 1132-1984 直柄机用铰刀 Machine reamers with parallel shanks

20 GB/T 1133-1984 锥柄机用铰刀 Machine reamers with Morse taper shanks

21 GB/T 1134-1984 带刃倾角锥柄机用铰刀 Machine reamers with edge inclination Morse taper shanks

22 GB/T 1135-1984 套式机用铰刀 Shell machine reamers

23 GB/T 1139-1984 直柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with parallel shanks

24 GB/T 1140-1984 锥柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with Morse taper shanks

25 GB/T 1141-1984 锥柄扩孔钻 Core drills with Morse taper shanks

26 GB/T 1142-1984 套式扩孔钻 Shell drills

27 GB/T 1143-1984 60°、90°、120°锥柄锥面锪钻 Countersinks with morse taper shanks for angles 60°,90°and 120°inclusive

28 GB/T 1214.1-1996 游标类卡尺 通用技术条件 The specification for callipers of vernier type

29 GB/T 1214.2-1996 游标类卡尺 游标卡尺 The vernier callipers for callipers of vernier type

30 GB/T 1214.3-1996 游标类卡尺 高度游标卡尺 The high gauge for callipers of vernier type

31 GB/T 1214.4-1996 游标类卡尺 深度游标卡尺 The depth gauge for callipers of vernier type

32 GB/T 1216-1985 外径千分尺 Micrometers

33 GB/T 1217-1986 公法线千分尺 Gear tooth micrometers

34 GB/T 1218-1987 深度千分尺 Depth micrometers

35 GB/T 1219-1985 百分表 Dial gauges