行业标准规范英汉对照-内燃机(1)

1 GB/T 725-1991 内燃机产品名称和型号编制规则 Internal combustion engines—Nomenclature and code of designations

2 GB/T 726-1994 往复式内燃机 旋转方向、气缸和气缸盖上气门的标志及直列式内燃机右机、左机和发动机方位的定义 Reciprocating internal combustion engines--Designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in line engines and locations on an engine

3 GB/T 727-1985 涡轮增压器产品命名和型号编制方法 Denomination for turbochargers and code of identification symbols

4 GB/T 1105.1-1987 内燃机台架性能试验方法 标准环境状况及功率、燃油消耗和机油消耗的标定 Performance test methods for reciprocating internal combustion engine--Standard ambient conditions and declarations of power, fuel consumption and lubricating oil consumption

5 GB/T 1105.2-1987 内燃机台架性能试验方法 试验方法 Performance test methods for reciprocating internal combustion engine--Test methods

6 GB/T 1105.3-1987 内燃机台架性能试验方法 测量技术 Performance test methods for reciprocating internal combustion engine--Measurement techniques

7 GB/T 1147-1987 内燃机通用技术条件 Reciprocating internal combustion engines--General technical specifications

8 GB/T 1148-1993 内燃机铝活塞技术条件 Aluminium piston--Reciprocating internal combustion engines--Technical specifications

9 GB/T 1149.1-1994 内燃机活塞环 通用规则 Internal combustion engines--Piston rings--General specifications

10 GB/T 1149.2-1994 内燃机活塞环 术语 Internal combustion engines--Piston rings-Vocabulary

11 GB/T 1149.3-1992 内燃机活塞环 刮环 Internal combustion engines-Piston rings-Scraper rings

12 GB/T 1149.4-1994 内燃机活塞环 技术要求 Internal combustion engines--Piston rings--Quality requirements

13 GB/T 1149.5-1992 内燃机活塞环 油环 Internal combustion engines-Piston rings-Oil control rings

14 GB/T 1149.6-1994 内燃机活塞环 检验方法 Internal combustion engines--Piston rings--Inspection measuring principles

15 GB/T 1149.7-1994 内燃机活塞环 螺旋撑簧油环 Internal combustion engines--Piston rings--Coil-spring-loaded oil control rings

16 GB/T 1150-1993 内燃机湿式铸铁气缸套技术条件 Internal combustion engines--Cast iron wet type cylinder liners--Specification

17 GB/T 1151-1993 内燃机主轴瓦及连杆轴瓦技术条件 Internal combustion engines--Main and connecting rod bearings--Specification

18 GB 1576-1996 低压锅炉水质 Water quality for low pressure boilers

19 GB/T 1859-1989 内燃机噪声声功率级的测定 准工程法 Determination of sound power levels of internal combustion engines noise—Quasi-engineering method

20 GB/T 1883-1989 往复活塞式内燃机 术语 Reciprocating internal combustion engines—Terminology

21 GB/T 1921-1988 工业蒸汽锅炉 参数系列 Specifications for industrial steam boiler

22 GB/T 2785-1988 内燃机气门弹簧技术条件 Internal combustion engine--Technical requirements for valve springs