行业标准规范英汉对照-工艺装备(4)

202 GB/T 5806-1986 锉刀通用技术条件 General technical condition of files

203 GB/T 5807-1986 锉刀试验方法 Test methods of files

204 GB/T 5808-1986 锉刀检验规则、标志与包装 Test regulations, marking and packaging of files

205 GB/T 5809-1986 锉刀分类、编号规则 Classification and numbering regulations of files

206 GB/T 6060.2-1985 表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面 Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed

207 GB/T 6060.3-1986 表面粗糙度比较样块 电火花加工表面 Roughness comparison specimens--Spark-erosion machining surfaces

208 GB/T 6060.4-1988 表面粗糙度比较样块 抛光加工表面 Roughness comparison specimens--Polshed surfaces

209 GB/T 6060.5-1988 表面粗糙度比较样块 抛(喷)丸、喷砂加工表面 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces

210 GB/T 6062-1985 轮廓法触针式表面粗糙度测量仪 轮廓记录仪及中线制轮廓计 Stylus instruments for the measurement of surface roughness by the profile method profile recording instruments and profile meters by the system M

211 GB/T 6081-1985 直齿插齿刀的基本型式和尺寸 The basic type and dimensions for spur shaper cutters

212 GB/T 6082-1985 直齿插齿刀通用技术条件 The general technical specifications for spur shaper cutters

213 GB/T 6083-1985 齿轮滚刀的基本型式和尺寸 The basic types and dimensions for gear hobs

214 GB/T 6084-1985 齿轮滚刀通用技术条件 The general technical specifications for gear hobs

215 GB/T 6091-1985 刀口形直尺 Straight edge

216 GB/T 6092-1985 90°角尺 Squares 90°

217 GB/T 6093-1985 量块 Gauge blocks

218 GB/T 6117.1-1996 立铣刀 第1部分: 直柄立铣刀的型式和尺寸 End mills--Part 1: Milling cutters with parallel shanks

219 GB/T 6117.2-1996 立铣刀 第2部分: 莫氏锥柄立铣刀的型式和尺寸 End mills--Part 2: Milling cutters with morse taper shanks

220 GB/T 6117.3-1996 立铣刀 第3部分: 7/24锥柄立铣刀的型式和尺寸 End mills--Part 3: Milling cutters with 7/24 taper shanks

221 GB/T 6118-1996 立铣刀 技术条件 End mills--Technical specifications

222 GB/T 6119.1-1996 三面刃铣刀 型式和尺寸 Side and face milling cutter--Tapes and dimensions

223 GB/T 6119.2-1996 三面刃铣刀 技术条件 Side and face milling cutter--Technical specifications

224 GB/T 6120-1996 锯片铣刀 型式和尺寸 metal slitting saws--Types and dimensions

225 GB/T 6121-1996 锯片铣刀 技术条件 metal slitting saws--Technical specifications

226 GB/T 6122-1985 圆角铣刀 Corner-rounding cutters

227 GB/T 6124.1-1996 T型槽铣刀 第1部分: 直柄T型槽铣刀的型式和尺寸 T-slot cutters--Part 1: Dimensions of T-slot cutters with plain or flated parallel shanks

228 GB/T 6124.2-1996 T型槽铣刀 第2部分: 莫氏锥柄T型槽铣刀的型式和尺寸 T-slot cutters--Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes