202 GB/T 5806-1986 锉刀通用技术条件 General technical condition of files
203 GB/T 5807-1986 锉刀试验方法 Test methods of files
204 GB/T 5808-1986 锉刀检验规则、标志与包装 Test regulations, marking and packaging of files
205 GB/T 5809-1986 锉刀分类、编号规则 Classification and numbering regulations of files
206 GB/T 6060.2-1985 表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面 Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed
207 GB/T 6060.3-1986 表面粗糙度比较样块 电火花加工表面 Roughness comparison specimens--Spark-erosion machining surfaces
208 GB/T 6060.4-1988 表面粗糙度比较样块 抛光加工表面 Roughness comparison specimens--Polshed surfaces
209 GB/T 6060.5-1988 表面粗糙度比较样块 抛(喷)丸、喷砂加工表面 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces
210 GB/T 6062-1985 轮廓法触针式表面粗糙度测量仪 轮廓记录仪及中线制轮廓计 Stylus instruments for the measurement of surface roughness by the profile method profile recording instruments and profile meters by the system M
211 GB/T 6081-1985 直齿插齿刀的基本型式和尺寸 The basic type and dimensions for spur shaper cutters
212 GB/T 6082-1985 直齿插齿刀通用技术条件 The general technical specifications for spur shaper cutters
213 GB/T 6083-1985 齿轮滚刀的基本型式和尺寸 The basic types and dimensions for gear hobs
214 GB/T 6084-1985 齿轮滚刀通用技术条件 The general technical specifications for gear hobs
215 GB/T 6091-1985 刀口形直尺 Straight edge
216 GB/T 6092-1985 90°角尺 Squares 90°
217 GB/T 6093-1985 量块 Gauge blocks
218 GB/T 6117.1-1996 立铣刀 第1部分: 直柄立铣刀的型式和尺寸 End mills--Part 1: Milling cutters with parallel shanks
219 GB/T 6117.2-1996 立铣刀 第2部分: 莫氏锥柄立铣刀的型式和尺寸 End mills--Part 2: Milling cutters with morse taper shanks
220 GB/T 6117.3-1996 立铣刀 第3部分: 7/24锥柄立铣刀的型式和尺寸 End mills--Part 3: Milling cutters with 7/24 taper shanks
221 GB/T 6118-1996 立铣刀 技术条件 End mills--Technical specifications
222 GB/T 6119.1-1996 三面刃铣刀 型式和尺寸 Side and face milling cutter--Tapes and dimensions
223 GB/T 6119.2-1996 三面刃铣刀 技术条件 Side and face milling cutter--Technical specifications
224 GB/T 6120-1996 锯片铣刀 型式和尺寸 metal slitting saws--Types and dimensions
225 GB/T 6121-1996 锯片铣刀 技术条件 metal slitting saws--Technical specifications
226 GB/T 6122-1985 圆角铣刀 Corner-rounding cutters
227 GB/T 6124.1-1996 T型槽铣刀 第1部分: 直柄T型槽铣刀的型式和尺寸 T-slot cutters--Part 1: Dimensions of T-slot cutters with plain or flated parallel shanks
228 GB/T 6124.2-1996 T型槽铣刀 第2部分: 莫氏锥柄T型槽铣刀的型式和尺寸 T-slot cutters--Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes