行业标准规范英汉对照-工艺装备1

　　1 GB/T 967-1994螺母丝锥Nut taps

　　2 GB/T 968-1994丝锥螺纹公差Manufacturing tolerances on the threaded portion of taps

　　3 GB/T 969-1994丝锥技术条件Technical specification for taps

　　4 GB/T 970.1-1994圆板牙型式和尺寸The types and dimensions for circular screwing dies

　　5 GB/T 970.2-1994圆板牙技术条件Technical specifications for circular screwing dies

　　6 GB/T 970.3-1994圆板牙架型式和互换尺寸Die stocks--Interchangeability dimensions

　　7 GB/T 971-1994滚丝轮Thread rolling cylindrical dies

　　8 GB/T 972 -1994搓丝板Thread rolling flat dies

　　9 GB/T 1008-1989机械加工工艺装备基本术语General terminology of machining tooling

　　10 GB/T 1109-1985短莫氏锥柄立铣刀End mills with short Morse taper shank

　　11 GB/T 1115-1985圆柱形铣刀Cylindrical cutters

　　12 GB/T 1117-1985直齿三面刃铣刀Side and face milling cutter with straight teeth

　　13 GB/T 1118-1985错齿三面刃铣刀Side and face milling cutters with double alternate helix

　　14 GB/T 1119-1985尖齿槽铣刀Flat relieved tooth slotting cutters

　　15 GB/T 1124.1-1996凸凹半圆铣刀第1部分:凹半圆铣刀的型式和尺寸Convex and concave milling cutters--Part 1: The types and dimensions for concave milling cutters

　　16 GB/T 1124.2-1996凸凹半圆铣刀第2部分:凸半圆铣刀的型式和尺寸Convex and concave milling cutters--Part 2: The types and dimensions for convex milling cutters

　　17 GB/T 1124.3-1996凸凹半圆铣刀技术条件Convex and concave milling cutters technical specifications

　　18 GB/T 1131-1984手用铰刀Hand reamers

　　19 GB/T 1132-1984直柄机用铰刀Machine reamers with parallel shanks

　　20 GB/T 1133-1984锥柄机用铰刀Machine reamers with Morse taper shanks

　　21 GB/T 1134-1984带刃倾角锥柄机用铰刀Machine reamers with edge inclination Morse taper shanks

　　22 GB/T 1135-1984套式机用铰刀Shell machine reamers

　　23 GB/T 1139-1984直柄莫氏圆锥和公制圆锥铰刀Morse and metric taper reamers with parallel shanks

　　24 GB/T 1140-1984锥柄莫氏圆锥和公制圆锥铰刀Morse and metric taper reamers with Morse taper shanks

　　25 GB/T 1141-1984锥柄扩孔钻Core drills with Morse taper shanks

　　26 GB/T 1142-1984套式扩孔钻Shell drills

　　27 GB/T 1143-1984 60°、90°、120°锥柄锥面锪钻Countersinks with morse taper shanks for angles 60°,90°and 120°inclusive

　　28 GB/T 1214.1-1996游标类卡尺通用技术条件The specification for callipers of vernier type

　　29 GB/T 1214.2-1996游标类卡尺游标卡尺The vernier callipers for callipers of vernier type

　　30 GB/T 1214.3-1996游标类卡尺高度游标卡尺The high gauge for callipers of vernier type

　　31 GB/T 1214.4-1996游标类卡尺深度游标卡尺The depth gauge for callipers of vernier type

　　32 GB/T 1216-1985外径千分尺Micrometers

　　33 GB/T 1217-1986公法线千分尺Gear tooth micrometers

　　34 GB/T 1218-1987深度千分尺Depth micrometers

　　35 GB/T 1219-1985百分表Dial gauges